AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

During 2012, the employer of this essay carried out a telephone survey with 18000 participants and a web panel survey with 708 participants. Those who partook in the telephone survey were given a choice to join the web panel. The purpose of this work is to study the participants of the telephone survey and see if they reflect the Swedish population with regards to several socio-demographic factors. Also, we intend to investigate if the propensity to join the web panel differs for participants of the telephone survey with regards to various socio-demographic affiliations. It is also of interest to study if the response pattern is different for participants of the telephone survey that would like to join the web panel and those who reject.

Lumilos is a work investigating the possibilities to use light and color in an interactive design context. I have explored different light sources and compared them to each other and given a short description of the history of light and how it has been developed during the industrialization in the western world. I have also investigated what is currently done in the field and summarized that with examples in the categories passive-, colored-, material- and interactive light. The conclusion is that working with interactive color and light is a hard task. There are many different angles to take into account such as personal likings and earlier experiences that is uncontrollable by the designer. Yet there are many possibilities and light is a material that is moldable in many forms. I have put the knowledge about light and color into practice and developed an interactive light wall that is visualizing energy consumption with the use of different colors of light and animations.

Inspired by how to sketch a light cone from a flashlight in a comic I wanted to create an armature carried only by its own light cone. To manage this challenge I sketched in an architectural and sculptural way, where I chose to ignore the function of the lamp as long as possible.As a result I developed an armature with a stunning shape, with an illusion that it was carried by its own light cone. It could be hanged on a wall, placed on a table, pushed against a ceiling or standing on the floor.Depending of its size the light cone from the light source lightens up the surface and draws attention to the otherwise forgotten wallpaper or the undisposed statue in the darkness of the city..

Lättviktsskivor till möbelindustrin har varit ett omskrivet tema i olika branschtidningar den sista tiden.Detta examensarbete beskriver och undersöker en ny konstruktion av en lättviktsskiva i massivt trä.Lättviktsskivan är uppbyggd som en sandwichkonstruktion i tre skikt. Ytskikten består av 6 mm tjockalimfogar och kärnmaterialet av profilerade distanser. Materialet är furu och lättviktsskivan har endensitet på 320 kg/m3 vid 39 mm tjocklek. Utifrån kontakter med utvalda tillverkare och användare avskivmaterial, samt genom tester, har denna konstruktion granskas och förslag på förbättringar har tagitsfram. Den ursprungliga distansen som var sammansatt av två halvor med centrumhål har ersatts av enmassiv distans med en liknande profilering.

The animal welfare act in Sweden states that dairy cows need to have at least a dim light present at night, but there are no recommendations for what intensity the light should have. It is unknown how cows perceive and react to low light intensities and earlier studies on this topic are limited. Red light as night light has also been suggested, based on the cows? inability to perceive red light. This have however been questioned. The aim with this study was to investigate how four different light intensities affect dairy cows behavior.

Successful broiler production in hot climates requires knowledge of how birds are affected by heat stress. It is important with access to water and good ventilation to facilitate coping with the heat. It may be useful to reduce the consumption of feed during the hottest hours of the days, which together with a few hours of extra light available could improve both productivity and animal welfare. The vision in birds is superior to that of humans and most other mammals. Continuous light and light with low intensity can cause eye injuries, affect the eye development in young chicken negatively, as well as provide increased incidence of foot pad lesions. Access to light affects the production but also the welfare of birds.

This thesis report describes the development of concepts regarding how weight can be reduced to the analytical instrument Biacore 4000. This thesis has resulted in five different concept proposals, all of which is solutions to reduce the instrument's weight.The thesis started with a pre-study where the instrument's structure and function were studied using both Solid Works, the opportunity to study the instrument in real life were also possible done. During this phase, a weight study was conducted as well, in which the instrument's weight distribution was studied and mapped.Following the initial phase, the work proceeded by developing concrete concepts to reduce the weight of the instrument where focus mainly was on the two cabinets. In addition, another two concepts were revealed, both with a more general approach.At the final phase of the thesis, the concepts were compiled and evaluated among themselves and the initial instrument.The thesis resulted in a study of the instrument's structure and weight distribution, with suggestions on how weight may be reduced for the instrument.The result factors such as materials, and manufacturing were aspects that were taken into consideration.At the final section of the report, suggestions for further work in which different aspects are discussed can be found..

The purpose of this review was to study the cow eye physiology, focusing on how it registers light, and to see how light affects the cow?s milk yield. It has been showed in studies that more hours of light per day (16 hours of light a day) as opposed to about 9-12 hours of light a day, increases milk yield for dairy cows. This review contains suggestions on how this is connected with the physiology of the eye. Vision is an important sense for many mammals, and is used to check out the animals surroundings. Sensor cells in the eyeball help in turning photons from the light into signals to the brain.

The purpose of the study was to examine what methods and strategies individuals use to maintain their weight loss. Another aim was to explore which factors can complicate or simplify weight loss maintenance. Fifty-four individuals who had maintained their weight loss more than a year, participated by answering a questionnaire. The questionnaire was constructed and distributed through the internet. The answers were registered in the program google docs.  The participants mentioned successful methods and strategies, such as exercising regularly, the majority exercised 30 minutes at least five times per week.

AimThe purpose of this degree thesis was to find out what strategies and behaviours earlier overweight individuals have used to maintain their weight loss.- What strategies did the participants use to loose weight?- Which behaviours are related with maintained weight loss?MethodThe study is based on an encase research with earlier overweight individuals who had lost weight with help of the Cambridge method. The chosen population who further more had maintained their weight for over one year have answered questions about their successfully maintained weight loss.ResultsThe results are based on 32 overweighed individuals, 9 men and 23 women, who had maintained their weight loss for over one year. After the initial weigh loss by help of the Cambridge method their main strategy was to change eating behaviour ? by eating on regular schedule, choose food with less fat ? and to increase their physical activity.

In this study, we investigate various lighting applications in a virtual environment, where we compare between light based in naturalism (natural light) and pictorialism (artistic light). The purpose of this study is to gain further knowledge in lighting, which is increasingly important for game graphics. Theory are examined to gather information and recommendations on how to use various light settings that convey different emotions. We then use this information to illuminate the environment that we have built. The environment is presented in Unreal 4 for respondents who are allowed to move around freely in the environment.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

The relation between the cave and the circumpolar light conditions has long been a part of the interpretation of the meaning of the Norwegian cave art. This paper explores the relationship by trading the concept of a sensory dichotomy between light and darkness for that of a perceptual relationship between the paintings, the environment and the light..